There are a few things you will need
to assemble your kit properly.
1. Locktite, lots of it. All Metal
heli's require allot of locktite. I
would choose the blue because I
don't like heating the screws to get
them back out later. Also, remember
to shake your locktite thoroughly
before each use!
2. Phillips head screw drivers. A
set of jewelers Phillips will save
you allot of headaches. Also, a #1.
Just tell the hardware store #1
Phillips and they will know what you
want.
3. Zip ties and side cutter pliers.
4. Double Sided servo tape.
5. Suggested radio equipment. (See
Radio Page)
6. 5.5 mm socket and nut driver.
7. Needle nose pliers.
8. Remember that this heli is
designed to run a maximum main rotor
speed of 2400-2500 RPM. This is not
a micro that needs insane head
speeds to fly well. You must
have the 25T slow tail gear to run
head speeds this high.
If you dont have it 2000 RPM is the
absolute max.
